In the manual (//www.samlea.com/support/documentation/downloads/scenescan_manual.pdf), P.12, S.7.5 :
This is a big limitation for our case. Our stereo system has Stereo angle of at least 15 Degrees. Is there any way to overcome this limitation?Both cameras must have an exactly parallel viewing direction. They must be
mounted on a plane with a displacement that is perpendicular to the cameras'
One more question please, If the cameras does not have synchronizations pin, will the system work? I know that the accuracy will decrease a lot, but would the system in general work or the synchronization signals are mandatory?
Thank you very much for your collaboration!